Most popular
Easiest
Pro workflow
Easiest
Pro workflow
Sumo Transfers
Wash durability
Sumo DTF transfers are tested for 100+ washes. How long a print lasts also depends on how it is pressed and how the garment is washed, so this page puts the press settings and the care steps in one place.
Press it right
Use the settings for your press. Peel the film hot, right after the press opens.
| Press | Temperature | Time |
|---|---|---|
| Industrial heat press | 300°F | 7 sec |
| Manual heat press | 310°F | 10 sec |
| Cricut heat press | 335°F | 20 sec |
| Hat press | 230°F | 8 sec |
Step-by-step instructions and videos are in our DTF press guide.
Care for printed garments
- Turn the garment inside out before washing.
- Wash in cold water.
- Skip high dryer heat: tumble dry low or hang to dry.
- Do not iron directly on the print.
If a print lifts or cracks
Most early lifting comes from pressing below the settings for your press. Check the table above and press again with a cover sheet. If a transfer still fails, tell us within 48 hours of receiving your order: email info@sumotransfers.com with your order number and photos, or call +1 (805) 806-8650. See our refund policy.